Ordering Information

Specifications and performance

Operation process

About this test

This product is used for the qualitative detection of monkeypox virus antigens during infection. Monkeypox is an infectious disease caused by the monkeypox virus and is common in Africa. Common symptoms of monkeypox infection include fever, headache, muscle aches, low energy, swollen lymph nodes, and rash or lesions. The product only needs to collect rash exudates, nasal swabs, oropharyngeal swabs, mix them with sample diluent, and add three drops to the sample hole. The results will be available in 10 minutes, and the results will be valid within 30 minutes.

Fast and easy to use

Positive: A colored band in the quality control area (C) and a colored band in the test area(T), indicating the specimen contains monkeypox virus antigens.

Note: The colored bands in the test area (T) may appear in different shades of color.

However, within the specified observation time, no matter the color of the colored band isdark or light, even if there is only a very weak colored band, it should be judged as apositive result. If you suspect monkeypox virus infection, please report it immediately andseek medical treatment according to the regulations.

Negative: Only one colored band appears in quality control area (C), and there is no colored band appears in test area (T). Negative results indicated that monkeypox virus antigen is not detected in the specimen.

Note: A negative result cannot completely rule out the possibility of infection. Follow-uptreatment should be carried out in accordance with local epidemic prevention and controlpolicies. If necessary, it is recommended to go to the hospital for further examination.

Invalid: There is no colored band appears in the quality control area (C), the result is considered to be invalid.

Note: Invalid results may be caused by improper operations or the deteriorated reagentbeyond the expiration date. In any case, it should be retested.

Operation Suggestions

1. Please read the instruction manual carefully before use, and carry out the test operation in strict accordance with the kit instructions.

2. Pay attention to safety measures during operation, such as wearing gloves.

3. This product is a one-time use in vitro diagnostic product, please do not reuse it.

4. If the aluminum foil bag is found to be damaged, do not use it. Use the test pad as soon as possible after opening the foil bag.

5. The temperature has a great influence on the test results. It should be tested at room temperature.

6. Do not mix test cards and sample diluents from different batches.

7. This reagent does not contain any pathogens, but wastes such as reagents, swabs extraction tubes and samples after testing must be treated as potential infectious substances and should be properly handled in accordance with the relevant regulations.

Operation Flow